TA3318-2
$990.00
Engine Preheat Kit – 4 Cyl; UL Power – 230 volt
Description
Engine Preheat Kit for 4 Cylinder UL Power non-certified engines
This preheat kit contains threaded heat elements located in each cylinder assembly and one pad heat element on the engine crankcase/oil sump. This multipoint configuration fully preheats the engine and attached accessories. Power is routed to the elements through a dedicated wiring assembly with LED system power indication and circuit overload protection standard. The system is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours. Refer to our Frequently Asked Questions or Why Tanis or Contact us for additional information.
This preheat kit is compatible with all engine monitor systems as the threaded heat elements that replace intake bolt fasteners.
This preheat kit when installed will supply 200 watts with a 0.9 amp draw at 230 volts.
* Required Bonding sealant sold separately. Quantity 1, PN: TAU02788
Additional Information
Cylinder Piston/Radial: 4
Voltage: 230
USA-Cert (8130-3 available): N/A (NO)
Old Part numbers: N/A
Engine Manufacturer: UL Power
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 03318-230, System Kit drawing UL Power, 4 cyl 224.30 KB
-
System Install Instructions
- TNP3318, Instruction for install on UL power 350
- TNG1000, Installation Guide 5.38 MB
-
Operator's guide
- TPG1000, Operating Guide General Preheat Kit 353.41 KB
-
ICA (Instructions for Continued Airworthiness)
- TCA1000, ICA General Preheat Kit (all kits) 269.97 KB
-
Component Install Instructions
- TN02788, Bonding of Pad Element Install Instructions (was 186) 121.86 KB
- TN02829, Circular Plug and Receptacle Install Instructions 812.54 KB
- TN03300, Install instruction, Bracket Kit – Circular Plug 259.16 KB
- TN03039, LED Indicator Light Install Instructions 101.52 KB
-
Drawing - Cable Kit/Wire Diagram
- 03317, Cable kit/wire diagram drawing for UL350 226.91 KB