TA3093-2
$1,960.00
Engine Preheat Kit – 4 Cyl – 230 Volt
Description
Engine Preheat Kit for SR305 – 4 Cylinder diesel engines
This preheat kit contains threaded heat elements located in each cylinder assembly, 4 threaded heat elements in the oil sump/pan area, a pad element on the oil cooler, and a pad on the heat exchanger. This multipoint configuration fully preheats the engine and attached accessories. Power is routed to the elements through a dedicated wiring assembly with LED system power indication and circuit overload protection standard. The system is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours. Refer to our Frequently Asked Questions or Why Tanis or Contact us for additional information.
This preheat kit is compatible with all engine monitor systems as the threaded heat elements that replace intake bolt fasteners.
This preheat kit when installed will supply 480 watts with a 2.1 amp draw at 230 volts.
* Required Bonding sealant sold separately. Quantity 1, PN: TAU02788
Additional Information
Cylinder Piston/Radial: 4
Voltage: 230
USA-Cert (8130-3 available): PMA kit (Yes)
Old Part numbers: N/A
Engine Manufacturer: SAFRAN - SMA
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 03093-230, Kit/system drawing for SR305 -230 volt 224.68 KB
-
System Install Instructions
- TNP3093, System/kit installation instruction - SR305 700.45 KB
- TNG1000, Installation Guide 5.38 MB
-
Operator's guide
- TPG1000, Operating Guide General Preheat Kit 353.41 KB
-
ICA (Instructions for Continued Airworthiness)
- TCA1000, ICA General Preheat Kit (all kits) 269.97 KB
-
Component Install Instructions
- TN02788, Bonding of Pad Element Install Instructions (was 186) 121.86 KB
- TN02793, Instruction for DT series connectors (was 192) 329.80 KB
- TN02829, Circular Plug and Receptacle Install Instructions 812.54 KB
- TN02905, Generic Threaded Element Install Instructions.pdf 1.62 MB
- TN03039, LED Indicator Light Install Instructions 101.52 KB
- TN03300, Install instruction, Bracket Kit – Circular Plug 259.16 KB
-
Drawing - Cable Kit/Wire Diagram
- 03092, cable kit for SR305 239.31 KB