TA3231-2
$1,990.00
Turbine Engine Preheat Kit – GE Aviation Czech M601 -230V
Description
This system is purchased and installed per engine. It runs off of a 230 volt power source. Contact us for additional information for connecting systems to a single plug location.
Turbine engine preheating is provided through the use of pad heat elements on the engine nose case, and accessory cases. This heats important items like the FCU, bearings and oils.
For operation below freezing, the complete aircraft should be heated by incorporating battery and avionics preheat.
This preheat kit when installed will supply 573 watts with a 2.5 amp draw at 230 volts.
* Required Bonding sealant sold separately. Quantity 1, PN: TAU02788
This kit is applicable for M601 and H80 series engines.
FAA TCDS E00048EN:
M601D-11, M601E-11, M601E-11S, M601E-11A, M601E-11AS, M601F,
H80, H80-100, H80-200, H75-100, H75-200, H85-100, H85-200.
Additional Information
Turbine Model: Various Models
Old Part Number: TSTGEM601-3231-230 TSTGEM601-3231-230
Engine Manufacturer: GE
Voltage: 230
USA-Cert (8130-3 available): PMA kit (Yes)
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 03231-230, System Kit Drawing for GE-Czech 99.56 KB
-
System Install Instructions
- TNT3231, Kit Install Instructions for GE M601 474.34 KB
-
Operator's guide
- TPG1000, Operating Guide General Preheat Kit 353.41 KB
-
ICA (Instructions for Continued Airworthiness)
- TCA1000, ICA General Preheat Kit (all kits) 269.97 KB
-
Component Install Instructions
- TN02788, Bonding of Pad Element Install Instructions (was 186) 121.86 KB
- TN02793, Instruction for DT series connectors (was 192) 329.80 KB
- TN02829, Circular Plug and Receptacle Install Instructions 812.54 KB
- TN02855, FCU-HMU Pad Location Element Install Instruction 268.61 KB
- TN03039, LED Indicator Light Install Instructions 101.52 KB
-
Drawing - Cable Kit/Wire Diagram
- 03232, Cable kit drawing for GEM601-3243 102.02 KB