TA2955-2
$10,000.00
Fixed Wing Preheat System – 230V
Description
Fixed Wing Preheat System – DHC-8 Q400 with twin PW150 – 230 Volt
Full aircraft preheating is accomplished through electrical resistance heat in the form of thin pads and belts sized and shaped to fit various parts. The pads are surface mounted with a bonding sealant/adhesive. Belts are secured around the perimeter with cable ties. Heated items include, engine accessory/reduction gearboxes, fluids, batteries, and attached accessories. Power is routed to the heat elements through a dedicated wiring assembly with power indication and circuit overload protection. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.
* DC730 bonding sealant sourced separately and required (12 ounces approximately).
A complete aircraft system supplies 2930 watts with a 13 amp draw at 230 volts.
Each engine is supplied on a separate plug with 1315 watts with a 5.7 amp draw at 230 volts.
The 3 batteries are supplied on a separate plug with 300 watts with a 1.3 amp draw at 230 volts.
Battery heat based on standard configuration:
3) TBP3228-38-230/100, located one each on battery. (Large battery – Honeywell 1152112-2 or Saft 416381)
* AVF0001 form requested for verification of purchase.
Additional Information
Turbine Model: DHC-8 (Q400)
Old Part Number: 0 TSFQ400-2955-230
Engine Manufacturer: Pratt & Whitney
Voltage: 230
USA-Cert (8130-3 available): PMA kit (Yes)
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 02955-230, System Kit Drawing for Q400 DHC8 with PW150 249.35 KB
-
System Install Instructions
- TNF2955, Q400 Fixed Wing Kit Install Instructions 1.70 MB
-
Operator's guide
- TPG1000, Operating Guide General Preheat Kit 353.41 KB
-
ICA (Instructions for Continued Airworthiness)
- TCA1000, ICA General Preheat Kit (all kits) 269.97 KB
-
Component Install Instructions
- TN02782, Click Bond Mount Install Instructions 381.67 KB
- TN02793, Instruction for DT series connectors (was 192) 329.80 KB
- TN02829, Circular Plug and Receptacle Install Instructions 812.54 KB
- TN03012, Instruction Junctions 358.47 KB
- TN03039, LED Indicator Light Install Instructions 101.52 KB
- TN03046, Instruction - Thermal Control 294.71 KB
- TNDC730, Bonding with DC730 Sealant Only 126.09 KB
-
Component Install/Mod Drawing
- 02983, Shore Power Kit Drawing/Install Instruction for Q400 312.04 KB
- 02984, Mounting plate for Q400 236.48 KB
-
Drawing - Cable Kit/Wire Diagram
- 02956, Cable Kit Drawing for PW150 DHC-8 213.96 KB
-
Forms
- AVF0001, Aircraft Verification Form 165.09 KB