TA3195-1
$14,130.00
Heli-Preheat Kit – MD902 – 115V
Description
Heli-Preheat Kit – MD900/MD902
FAA-STC: SR04347CH
Preheat is applied through electrical resistance heat in the form of thin pads sized and shaped to fit various parts. This includes engine reduction gearboxes, attached accessories, main & tail rotor gearboxes, batteries (Standard configs), avionics, cabin, and oil/hydraulic tanks. Power is routed to elements through dedicated wiring assemblies with circuit overload protection. Approved ground power location and mounting is field fabricated. System is self-regulating. Heated components reach an average state of thermal equilibrium in approximately six hours.
This preheat kit when installed will supply heat thru one plug. It will provide approximately 1142-watts at a load of 9.9-amps total at 115 volts.
* Required Bonding sealant sold separately. Quantity 5, PN: TAU02788
* AVF0001 form requested for verification of purchase.
Additional Information
Heil Manufacturer: MDHI
Helicopter Cylinders: N/A
Engine Manufacturer: Pratt & Whitney
Old Part Number: TSHMD902-3195-115 TSHMD902-3195-115
Voltage: 115
USA-Cert (8130-3 available): STC kit (YES)
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 03195-115, System/kit drawing MD902 196.79 KB
- TA3195-1, HP drawing rev D 86.52 KB
-
System Install Instructions
- TNH3195, System/kit Installation instruction MD902 1.18 MB
- TNG1000, Installation Guide 5.38 MB
-
Operator's guide
- TPG1000, Operating Guide General Preheat Kit 353.41 KB
-
ICA (Instructions for Continued Airworthiness)
- TCA1000, ICA General Preheat Kit (all kits) 269.97 KB
-
Component Install Instructions
- TN02070, Flush Mount Plug Install Instructions 214.03 KB
- TN02533, Flush Mount Plug W/cap Install Instructions 141.28 KB
- TN02782, Click Bond Mount Install Instructions 381.67 KB
- TN02788, Bonding of Pad Element Install Instructions (was 186) 121.86 KB
- TN02793, Instruction for DT series connectors (was 192) 329.80 KB
- TN03012, Instruction Junctions 358.47 KB
- TN03039, LED Indicator Light Install Instructions 101.52 KB
- TN03046, Instruction - Thermal Control 294.71 KB
- TN03094, Instruction AV Heater 1.59 MB
- TN03097, Instruction 2 place Door kit 456.38 KB
-
COMPONENT INSTALL/MOD DRAWING
- 03097, Drawing 2 place Door Kit 264.87 KB
- 03141, Drawing/install Panel/Bracket mount fuse kit 111.63 KB
-
Drawing - Cable Kit/Wire Diagram
- 03196, Cable kit/wire diagram drawing for MD902 142.88 KB
-
ELIGIBILITY (STC)
- SR04347CH, FAA-STC USA for MD902 197.48 KB
-
Forms
- AVF0001, Aircraft Verification Form 165.09 KB