TA2504-1
$2,950.00
Heli-Preheat System – Enstrom 480 – 115V
Description
Heli-Preheat System – Enstrom 480 with Rolls-Royce RR250-C20W
Preheating is accomplished using electrical resistance heat in the form of thin surface mounted pads sized and shaped to fit various parts of the aircraft, including the engine oil tanks, and main rotor transmission. Power is routed to the heat elements through a dedicated wiring assembly with circuit overload protection. The system is self-regulating through design. Heated components reach an average state of thermal equilibrium in six hours.
This preheat kit when installed will supply 292 watts with a 2.5 amp draw at 115 volts.
* A substitution of indicator light TLP3039-06-115 will be done for the old TLP1026-06-115. Instruction TN03039 replaces instruction TN01026.
* Required Bonding sealant sold separately. Quantity 2, PN: TAU02788
* RTB0001 form required for purchase.
System not eligible for form 8130-3.
Additional Information
Heil Manufacturer: Enstrom
Helicopter Cylinders: N/A
Engine Manufacturer: Rolls Royce (Allison)
Old Part Number: TAS300-50-DT-115, TSHEN480-2504-115, TSHEN480-2504-115
Voltage: 115
USA-Cert (8130-3 available): RTB (NO)
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 2504-115, System Kit Drawing for Enstrom 73.40 KB
-
System Install Instructions
- TNH2504, Enstrom 480 Install Instruction 4.81 MB
-
Operator's guide
- TPG0003, Operating Guide for Turbine Rotorcraft (RFMS) (OM300) 320.04 KB
-
ICA (Instructions for Continued Airworthiness)
- TCA0003, ICA for Rotorcraft (all) 359.84 KB
-
Component Install Instructions
- TN01026, Neon Indicator Light Install Instructions 90.88 KB
- TN02788, Bonding of Pad Element Install Instructions (was 186) 121.86 KB
- TN03039, LED Indicator Light Install Instructions 101.52 KB
-
Drawing - Cable Kit/Wire Diagram
- 2503, Cable Kit Drawing for Enstrom 480 102.95 KB
-
Forms
- RTB0001, Request To Build – Fillable Form 203.46 KB