TA2780-2
$1,480.00
Heli-Preheat Kit – F-28/280 – 230V
Description
Heli-Preheat Kit – Enstrom Helicopter, F-28 or F-280 – Standard (CHT not wells required)
Preheat is supplied through electrical resistance elements fitted in each cylinder assembly (intake bolt or rocker cover screw replacement) and in the form of thin pads sized and shaped to fit engine oil tank, and main rotor gearbox. Power is routed to the elements through a dedicated wiring assembly with circuit overload protection and power indicator light, and accommodations for battery heat kit. System is self-regulating, heated components reach an average state of thermal equilibrium in approximately six hours.
Known Engines: HIO-360-C1A, HIO-360-C1B, HIO-360-E1AD, HIO-360-E1BD, HIO-360-F1AD,
This preheat kit when installed will supply 390 watts with a 1.7 amp draw at 230 volts.
* Required Bonding sealant sold separately. Quantity 1, PN: TAU02788
* RTB0001 form required for purchase.
System not eligible for form 8130-3.
Additional Information
Heil Manufacturer: Enstrom
Cylinder Piston/Radial: 4
Helicopter Cylinders: 4
Engine Manufacturer: Lycoming
Old Part Number: TAS100-37-DT-230, TSHEN280-2780-230, TSHEN280-2780-230
Voltage: 230
USA-Cert (8130-3 available): RTB (NO)
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 02780-230, System Kit Drawing for Enstrom 280 with 4 Cylinder Lycoming 100.53 KB
-
System Install Instructions
- TNH2780, Enstrom Install Instruction with 4 cylinder Lycoming 954.88 KB
-
Operator's guide
- TPG0005, Operating Guide for Pistion Rotorcraft (RFMS) (OM100) 334.62 KB
-
ICA (Instructions for Continued Airworthiness)
- TCA0003, ICA for Rotorcraft (all) 359.84 KB
-
Component Install Instructions
- TN02771, Thread Element Install Instructions (771 series) 2.78 MB
- TN02788, Bonding of Pad Element Install Instructions (was 186) 121.86 KB
- TN02829, Circular Plug and Receptacle Install Instructions 812.54 KB
-
Drawing - Cable Kit/Wire Diagram
- 02781, Cable Kit Drawing for Enstrom 280 with 4 Cylinder Lycoming 112.56 KB
-
Forms
- RTB0001, Request To Build – Fillable Form 203.46 KB