TA2146-1
Part Number: TA2146-1
Engine Manufacturer: Rolls Royce (Allison)
PRICE:
$8,130.00
Heli-Preheat Kit – BO-105 – 115V
Description
Heli-Preheat Kit – BO-105 (BO-105A, BO-105C, BO-105S, BO-105LS A-1, BO-105LS A-3)
Preheat is applied through electrical resistance heat in the form of thin pads sized and shaped to fit various parts. This includes engine reduction gearboxes, attached accessories, main & tail rotor gearboxes, batteries (based on standard RG-390), avionics, cabin, and oil/hydraulic tanks. Power is routed to elements through dedicated wiring assemblies with circuit overload protection. Approved ground power location and mounting is field fabricated. System is self-regulating. Heated components reach an average state of thermal equilibrium in approximately six hours.
This preheat kit when installed will supply heat thru two plugs. It will provide approximately 841-watts at a load of 7.3-amps total at 115 volts.
* Required Bonding sealant sourced separately. Reference TNDC730, approximately 7 ounces required.
* AVF0001 form requested for verification of purchase.
Additional Information
Heil Manufacturer: Airbus (Eurocopter)
Helicopter Cylinders: N/A
Engine Manufacturer: Rolls Royce (Allison)
Old Part Number: TAS300-05, TAS300-05S, TAS300-05-DT, TAS300-05S-DT, TSHBO105-2146-115
Voltage: 115
USA-Cert (8130-3 available): PMA kit (Yes)
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 02146-115, System kit drawing for BO-105 196.59 KB
-
System Install Instructions
- TNH2146, system kit BO-105 868.42 KB
- TNG1000, Installation Guide 5.38 MB
-
Operator's guide
- TPG1000, Operating Guide General Preheat Kit 353.41 KB
-
ICA (Instructions for Continued Airworthiness)
- TCA1000, ICA General Preheat Kit (all kits) 269.97 KB
-
Component Install Instructions
- TN02070, Flush Mount Plug Install Instructions 214.03 KB
- TN02782, Click Bond Mount Install Instructions 381.67 KB
- TN02793, Instruction for DT series connectors (was 192) 329.80 KB
- TN02855, FCU-HMU Pad Location Element Install Instruction 268.61 KB
- TN03012, Instruction Junctions 358.47 KB
- TN03039, LED Indicator Light Install Instructions 101.52 KB
- TN03046, Instruction - Thermal Control 294.71 KB
- TN03094, Instruction AV Heater 1.59 MB
- TNDC730, Bonding with DC730 Sealant Only 126.09 KB
-
COMPONENT INSTALL/MOD DRAWING
- 03125, Connector Kit DWG/Installation Instruction (6 contact) 376.23 KB
- 03141, Drawing/install Panel/Bracket mount fuse kit 111.63 KB
- 03152, 2 place Door Kit 52.80 KB
-
Drawing - Cable Kit/Wire Diagram
- 1078, Cable kit/wire diagram for BO-105 221.88 KB
-
Forms
- AVF0001, Aircraft Verification Form 165.09 KB
Related Products