TA2772-1
$9,300.00
Heli-Preheat System – BK117/EC145, Lyc -115V
Description
Heli-Preheat System – Airbus (Eurocopter, MBB), BK117 or EC145 with Lycoming, LTS 101 (Twin Engine)
Preheat is supplied through electrical resistance elements in the form of thin pads sized and shaped to fit engine, main and tail rotor gearboxes, oil tanks, and battery (RG-380E). Power is routed to the elements through a dedicated wiring assembly with circuit overload protection and power indicator light. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.
This entire preheat kit when installed will supply 1048 watts with a 9.1 amp draw at 115 volts.
Optional cabin heat is available. TU03323
* AVF0001 form requested for verification of purchase.
Additional Information
Heil Manufacturer: Airbus (Eurocopter)
Helicopter Cylinders: N/A
Engine Manufacturer: Lycoming
Old Part Number: TAS300-06-DT-115 TSHBK117-2772-115
Voltage: 115
USA-Cert (8130-3 available): PMA kit (Yes)
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 02772-115, System Kit Drawing for BK117 with LTS101 255.25 KB
-
System Install Instructions
- TNH2772, System Kit Install Instructions for BK117/EC145 with LTS101 2.41 MB
- TNG1000, Installation Guide 5.38 MB
-
Operator's guide
- TPG1000, Operating Guide General Preheat Kit 353.41 KB
-
ICA (Instructions for Continued Airworthiness)
- TCA1000, ICA General Preheat Kit (all kits) 269.97 KB
-
Component Install Instructions
- TN02070, Flush Mount Plug Install Instructions 214.03 KB
- TN02788, Bonding of Pad Element Install Instructions (was 186) 121.86 KB
- TN02793, Instruction for DT series connectors (was 192) 329.80 KB
- TN03012, Instruction Junctions 358.47 KB
- TN03039, LED Indicator Light Install Instructions 101.52 KB
- TN03046, Instruction - Thermal Control 294.71 KB
- TN03097, Instruction 2 place Door kit 456.38 KB
-
Component Install/Mod Drawing
- 02769, Cable Kit Drawing for BK117 with LTS101 222.47 KB
- 03097, Drawing 2 place Door Kit 264.87 KB
- 03125, Connector Kit DWG/Installation Instruction (6 contact) 376.23 KB
- 03127, Drawing Connector Kit, 5 Contact 254.68 KB
- 03141, Drawing/install Panel/Bracket mount fuse kit 111.63 KB
- 2585, Fab.&Mod Drawing for FMP Skin Doubler 607.70 KB
-
Drawing - Cable Kit/Wire Diagram
- 02769, Cable Kit Drawing for BK117 with LTS101 222.47 KB
-
Forms
- AVF0001, Aircraft Verification Form 165.09 KB