TA2584-2
$15,300.00
STC Heli Preheat Kit – Bell 429 – 230V
Description
STC Heli Preheat Kit – Bell 429 PW207D1/D2, 230 Volt
Preheat is applied through electrical resistance heat in the form of thin pads sized and shaped to fit various parts. This includes engine reduction gearboxes, attached accessories, main & tail rotor gearboxes, battery (standard configs), and oil/hydraulic tanks. Power is routed to elements through dedicated wiring assembly with circuit overload protection. Bell approved ground power door assembly is include with extra places for additional ground power. System is self-regulating. Heated components reach an average state of thermal equilibrium in approximately six hours.
Kit also sold through Aeronautical Accessories
* Required Bonding sealant sold separately. Quantity 4, PN: TAU02788
FAA-STC: # SR03168CH.
TCCA-STC: #SH13-48 -SR03168CH .
Japan-STC: #STC-313-0SA
Russian TCDS approved: # СТ 325-BELL 429, as of Issue 08 dated August 26, 2014
EASA-STC: # 10057674
* AVF0001 form requested for verification of purchase.
Additional Information
Heil Manufacturer: Bell
Helicopter Cylinders: N/A
Engine Manufacturer: Pratt & Whitney
Old Part Number: TAS300-59-DT-230, TSHB429-2584-230, TSHB429-2584-230
Voltage: 230
USA-Cert (8130-3 available): STC kit (YES)
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 2584-230, System Kit Drawing for Bell 429 155.43 KB
-
System Install Instructions
- TNG1000, Installation Guide 5.38 MB
-
Operator's guide
- TPG1000, Operating Guide General Preheat Kit 353.41 KB
-
ICA (Instructions for Continued Airworthiness)
- TCA1000, ICA General Preheat Kit (all kits) 269.97 KB
-
Component Install Instructions
- TN02070, Flush Mount Plug Install Instructions 214.03 KB
- TN02782, Click Bond Mount Install Instructions 381.67 KB
- TN02788, Bonding of Pad Element Install Instructions (was 186) 121.86 KB
- TN02793, Instruction for DT series connectors (was 192) 329.80 KB
- TN02829, Circular Plug and Receptacle Install Instructions 812.54 KB
- TN02944, Bell 429 Shore Power Install Instruction 31.91 KB
- TN02948, Bell 429 Tail Rotor Bracket Install Instruction 44.95 KB
- TN03039, LED Indicator Light Install Instructions 101.52 KB
-
Component Install/Mod Drawing
- 02944, Shore Power Kit for Bell 429 (B429) Drawing/Install 704.98 KB
- 02948, Tail Boom Bracket Kit drawing for Bell 429 298.30 KB
- 02968, DRAWING - BRACKET CONNECTOR KIT 271.38 KB
-
Drawing - Cable Kit/Wire Diagram
- 2583, Cable Kit Drawing for Bell 429 132.08 KB
-
Eligibility (STC)
- SR03168CH, Bell 429 USA (FAA) STC 1.02 MB
- SH13-48-SR03168CH, Bell 429 (B429) Canada (TCCA) STC 185.41 KB
- STC-313-OSA, Bell 429 (B429) Japan (JCAB) STC Approval 383.53 KB
- CT325-Bell 429/0ΓN-4, Russia (IAC-AR) TCDS CT325 Rev 8 Approval 1.19 MB
- 10057674, EASA STC for B429 674.68 KB
-
Forms
- AVF0001, Aircraft Verification Form 165.09 KB