TA3184-2
$5,680.00
Heli-Preheat Kit – AS350, B1/B2/BA – 230V
Description
Heli-Preheat Kit – Airbus (Eurocopter) AS350 B or B1 or B2 or BA with Turbomeca, Arriel 1D or 1D1 or 1B – 230 Volt
Preheat is supplied through electrical resistance elements in the form of thin pads sized and shaped to fit engine, main & tail rotor gearboxes, oil tanks, and battery (based on single RG-350, RG-355 or RG-390 series battery). Power is routed to the elements through a dedicated wiring assembly with circuit overload protection and power indicator light. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.
This preheat kit when installed will supply 619 watts with a 2.7 amp draw at 230 volts.
* Required Bonding sealant sold separately. Quantity 2, PN: TAU02788
* AVF0001 form requested for verification of purchase.
Additional Information
Heil Manufacturer: Airbus (Eurocopter)
Helicopter Cylinders: N/A
Engine Manufacturer: Turbomeca
Old Part Number: TAS300-09-DT-230, TSHAS350-2034-230, TSHAS350-3184-230, TSHAS350-3184-230
Voltage: 230
USA-Cert (8130-3 available): PMA kit (Yes)
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 03184-230, System Kit Drawing for AS350B, B1, B2, BA, with Arriel 100.93 KB
-
System Install Instructions
- TNH3184, Installation instructions for AS350B B1 B2 BA with Arriel 1.75 MB
-
Operator's guide
- TPG0003, Operating Guide for Turbine Rotorcraft (RFMS) (OM300) 320.04 KB
-
ICA (Instructions for Continued Airworthiness)
- TCA0003, ICA for Rotorcraft (all) 359.84 KB
-
Component Install Instructions
- TN02070, Flush Mount Plug Install Instructions 214.03 KB
- TN02782, Click Bond Mount Install Instructions 381.67 KB
- TN02788, Bonding of Pad Element Install Instructions (was 186) 121.86 KB
- TN02793, Instruction for DT series connectors (was 192) 329.80 KB
- TN02840, Single Place Plug Door Install Instruction 227.65 KB
- TN03039, LED Indicator Light Install Instructions 101.52 KB
-
Component Install/Mod Drawing
- 2595, FMP Bracket Fab.&Mod. Dwg for EC, includes 02898 97.68 KB
- 03125, Connector Kit DWG/Installation Instruction (6 contact) 376.23 KB
- 03141, Drawing/install Panel/Bracket mount fuse kit 111.63 KB
-
Drawing - Cable Kit/Wire Diagram
- 03182, TCH Cable Kit for EC130 and AS350 214.09 KB
-
Forms
- AVF0001, Aircraft Verification Form 165.09 KB