TA11TA-1
$5,740.00
Heli-Preheat System – AS355, N/NP – 115V
Description
Heli-Preheat System – Airbus (Eurocopter), AS355 N or NP with Turbomeca, Arrius 1A or 1A1
Preheat is supplied through electrical resistance elements in the form of thin pads sized and shaped to fit engine, main & tail rotor gearboxes, and oil tanks. Power is routed to the elements through a dedicated wiring assembly with circuit overload protection and power indicator light. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.
This preheat kit when installed will supply 632 watts with a 5.5 amp draw at 115 volts.
* A substitution of indicator light TLS3039-06-115 will be done for the old TL01026-06-115. Instruction TN03039 replaces instruction TN01026.
* RTB0001 form required for purchase.
System not eligible for form 8130-3.
Additional Information
Heil Manufacturer: Airbus (Eurocopter)
Helicopter Cylinders: N/A
Engine Manufacturer: Turbomeca
Old Part Number: N/A TAS300-11A-DT-115
Voltage: 115
USA-Cert (8130-3 available): RTB (NO)
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 2561, System Kit Drawing for AS355 with Arrius 1A 54.42 KB
-
System Install Instructions
- TN02561, AS355N-NP Kit Install Instructions with Arrius 259.48 KB
-
Operator's guide
- TPG0003, Operating Guide for Turbine Rotorcraft (RFMS) (OM300) 320.04 KB
-
ICA (Instructions for Continued Airworthiness)
- TCA0003, ICA for Rotorcraft (all) 359.84 KB
-
Component Install Instructions
- TN01026, Neon Indicator Light Install Instructions 90.88 KB
- TN02070, Flush Mount Plug Install Instructions 214.03 KB
- TN02788, Bonding of Pad Element Install Instructions (was 186) 121.86 KB
- TN02793, Instruction for DT series connectors (was 192) 329.80 KB
- TN02840, Single Place Plug Door Install Instruction 227.65 KB
- TN03039, LED Indicator Light Install Instructions 101.52 KB
-
Drawing - Cable Kit/Wire Diagram
- 2043, Cable Kit Drawing for AS355 74.40 KB
- 2576, Generic Electrical Schematic Drawing for all TAS100 and TAS300 29.82 KB
-
Forms
- RTB0001, Request To Build – Fillable Form 203.46 KB