TA2798-1
$1,780.00
Heli-Preheat Kit – R22 – 115V
Description
Heli-Preheat Kit – Robinson R22
Preheat is applied through electrical resistance heat elements located in each cylinder assembly, on engine crankcase and oil sump/tank, main and tail rotor gearboxes, and hydraulic reservoir, preheat critical components, oil, and attached accessories. Power is routed to the elements through a dedicated wiring assembly with circuit overload protection and power indicator light. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.
This preheat kit when installed will supply 349 watts with a 3.0 amp draw at 115 volts.
* Required Bonding sealant sold separately. Quantity 1, PN: TAU02788
* AVF0001 form requested for verification of purchase.
Additional Information
Heil Manufacturer: Robinson
Helicopter Cylinders: 4
Engine Manufacturer: Lycoming
Old Part Number: TAS100-01-R22-771-DT-115, TAS100-01-R22-DT-115, TAS100S-01-R22-DT-115, TSHR22-2798-115, TSHR22-2798-115, TAS100-01-R22-771-DT-115
Voltage: 115
USA-Cert (8130-3 available): PMA kit (Yes)
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 02798-115, System Kit Drawing for R22 176.79 KB
-
System Install Instructions
- TNH2798, R22 Kit Install Instructions 1.18 MB
-
Operator's guide
- TPG1000, Operating Guide General Preheat Kit 353.41 KB
-
ICA (Instructions for Continued Airworthiness)
- TCA1000, ICA General Preheat Kit (all kits) 269.97 KB
-
Component Install Instructions
- TN01062, Plug Bracket PMT Install Instructions 599.34 KB
- TN02771, Thread Element Install Instructions (771 series) 2.78 MB
- TN02788, Bonding of Pad Element Install Instructions (was 186) 121.86 KB
- TN03039, LED Indicator Light Install Instructions 101.52 KB
-
Drawing - Cable Kit/Wire Diagram
- 02796, Cable Kit Drawing for R22 115.62 KB
-
Forms
- AVF0001, Aircraft Verification Form 165.09 KB