4 Way Indent (Octadent) Crimp Tool
Ratcheted hand crimp tool for certain solid D-subminiature contacts.
*Contacts length must be 0.73 to 1.20 inch [18.542 to 30.480 mm].
For use with wire gauges 16 thru 22 AWG.
Works for all Tanis DT series connectors.
TOOL CALIBRATION INFORMATION REFERENCE:
Use Minimum +-0.0005 Tolerance steel gage pins
DO NOT CRIMP GAGE PINS. Close die (hold closed for maximum crimp); Then use gauge pins.
GO is 0.040 inch [1.016 mm]
NO GO is 0.050 inch [1.27 mm]
Minimum distance of crimp location to edge of pin is 0.001 inch.
Minimum distance of crimp location to edge of witness hole is 0.001 inch.