TA3219-1
$1,540.00
Engine Preheat Kit – TAE 125 Series – 115 Volt
Description
This Kit is currently under review and not purchasable.
Engine Preheat Kit for TAE 125 Series Jet-A Diesel engine Series
Certified engine numbers: TAE 125-01, TAE 125-02-99,
TAE 125-02-114
This preheat kit contains threaded heat elements for the engine crankcase, oil sump, and PRGB. This multipoint configuration fully preheats the engine and attached accessories. Power is routed to the elements through a dedicated wiring assembly with LED system power indication and circuit overload protection standard. The system is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.
This preheat kit is compatible with all known engine monitor systems.
This preheat kit when installed will supply 400 watts with a 3.5 amp draw at 115 volts.
Additional Information
Cylinder Piston/Radial: 4
Engine Manufacturer: Continental
Old Part Number: 0 TSP4CYL-3219-115
Voltage: 115
USA-Cert (8130-3 available): PMA kit (Yes)
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
DRAWING - KIT (SYSTEM)
- 03219-115, 4cyl TAE 125 99.34 KB
-
SYSTEM INSTALL INSTRUCTIONS
- TNP3219, 4Cyl TAE 125 366.84 KB
-
OPERATOR'S GUIDE
- TPG1000, Operating Guide General Preheat Kit 353.41 KB
-
ICA (INSTRUCTIONS FOR CONTINUED AIRWORTHINESS)
- TCA1000, ICA General Preheat Kit (all kits) 269.97 KB
-
COMPONENT INSTALL INSTRUCTIONS
- TNG1000, Installation Guide 5.38 MB
- TN02634, Large threaded (sump) elements Install Instructions 282.41 KB
- TN02905, Generic Threaded Element Install Instructions.pdf 1.62 MB
- TN03039, LED Indicator Light Install Instructions 101.52 KB
-
DRAWING - CABLE KIT/WIRE DIAGRAM
- 03220, TC 4cyl-3219 TAE 125 109.08 KB