TA2579-2
$800.00
Engine Preheat Kit – 4 Cyl; Rotax 912/914/915 – 230V
Description
Engine Preheat Kit for 4 cylinder Rotax 912/914/915 (all models)
This preheat kit contains heat elements located in each cylinder assembly, one threaded heat element on the engine crankcase (prop reduction gearbox or oil pump area) and a pad heat element bonded on the oil tank. This multipoint configuration fully preheats the engine and attached accessories. Power is routed to the elements through a dedicated wiring assembly with system power indication circuit overload protection and plug mounting options. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.
This preheat kit when installed will supply 220 watts with a 1.0 amp draw at 230 volts.
* Required Bonding sealant sold separately. Quantity 1, PN: TAU02788
Additional Information
Cylinder Piston/Radial: 4
Old Part Number: TAS100-52-230, TSP4CYL-2579-230, TSP4CYL-2579-230
Engine Manufacturer: Rotax
Voltage: 230
USA-Cert (8130-3 available): PMA kit (Yes)
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 2579-230, System Kit Drawing for 4 Cylinder Rotax 912/914/915 231.71 KB
-
System Install Instructions
- TNP2579, 4 Cylinder Kit Install Instructions for Rotax Engines (912, 914, 915) 774.16 KB
-
Operator's guide
- TPG1000, Operating Guide General Preheat Kit 353.41 KB
-
ICA (Instructions for Continued Airworthiness)
- TCA1000, ICA General Preheat Kit (all kits) 269.97 KB
-
Component Install Instructions
- TN02639, M6-1.00 Threaded Element 505.89 KB
- TN02788, Bonding of Pad Element Install Instructions (was 186) 121.86 KB
- TN02829, Circular Plug and Receptacle Install Instructions 812.54 KB
- TN03039, LED Indicator Light Install Instructions 101.52 KB
- TN03345, Install instruction Bracket kit - circular plug 770.32 KB
-
Drawing - Cable Kit/Wire Diagram
- 03342, cable kit for Rotax engines 243.13 KB