TA2513-2
$820.00
Engine Preheat Kit – Jabiru 2200 – 230V
Description
Engine Preheat Kit for Jabiru 2200
This preheat kit contains threaded electrical resistance heat elements located in each cylinder assembly, and one pad heat element on the engine crankcase/oil sump. This multipoint configuration fully preheats the engine and attached accessories. Power is routed to the elements through a dedicated wiring assembly with system power indication and circuit overload protection. The system is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.
This preheat kit when installed will supply 188 watts with a 1.8 amp draw at 230 volts.
* Required Bonding sealant sold separately. Quantity 1, PN: TAU02788
This kit is not eligible for an 8130-3.
* RTB0001 form required for purchase on certified engine installations.
Additional Information
Cylinder Piston/Radial: 4
Old Part Number: TSP4CYL-2513-230 TSP4CYL-2513-230
Engine Manufacturer: Jabiru
Voltage: 230
USA-Cert (8130-3 available): RTB (NO)
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 2513-230, System Kit Drawing for 4 Cylinder Jabiru 2200 91.13 KB
-
System Install Instructions
- TNP2513, 4 Cylinder Jabiru 2200 Kit Install Instructions 949.77 KB
-
Operator's guide
- TFMS2513, Operating Guide for 4 Cylinder Jabiru 2200 103.08 KB
-
ICA (Instructions for Continued Airworthiness)
- TICA2513, ICA for 4 cylinder Jabiru 2200 578.55 KB
-
Component Install Instructions
- TN02771, Thread Element Install Instructions (771 series) 2.78 MB
- TN02788, Bonding of Pad Element Install Instructions (was 186) 121.86 KB
-
Drawing - Cable Kit/Wire Diagram
- 02859, Cable Kit Drawing for 4 Cylinder 256.08 KB