TA2765-2
$6,920.00
Heli-Preheat Kit – H135, (EC135 T1/T2/T3) – 230V
Description
Heli-Preheat Kit – Airbus (Eurocopter) H135 (EC135 T1 or T2 or T3) with Turbomeca, Arrius 2B or 2B1 or 2B2
Preheat is supplied through electrical resistance elements in the form of thin pads sized and shaped to fit engine, main and tail rotor gearboxes, oil tanks. Power is routed to the elements through a dedicated wiring assembly with circuit overload protection and power indicator light. System is self-regulating through design. Heated components reach an average state of thermal equilibrium in approximately six hours.
Firewall and Tail boom disconnection kits included.
This preheat kit when installed will supply 795 watts with a 3.5 amp draw at 230 volts.
Battery heat sold separately.
* Required Bonding sealant sold separately. Quantity 3, PN: TAU02788
* RTB0001 form required for purchase.
System not eligible for form 8130-3.
Additional Information
Heil Manufacturer: Airbus (Eurocopter)
Helicopter Cylinders: N/A
Engine Manufacturer: Turbomeca
Old Part Number: TAS300-25A-230, TAS300-25A-DT-230, TSHEC135-2765-230, TSHEC135-2765-230
Voltage: 230
USA-Cert (8130-3 available): RTB (NO)
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 02765-230, System Kit Drawing for EC135 535.13 KB
-
System Install Instructions
- TNH2765, EC135T1 T2 Install Instructions with Arrius 682.81 KB
-
Operator's guide
- TPG0003, Operating Guide for Turbine Rotorcraft (RFMS) (OM300) 320.04 KB
-
ICA (Instructions for Continued Airworthiness)
- TCA0003, ICA for Rotorcraft (all) 359.84 KB
-
Component Install Instructions
- TN01056, Fire Proof Grommet Install Instructions 107.07 KB
- TN02070, Flush Mount Plug Install Instructions 214.03 KB
- TN02782, Click Bond Mount Install Instructions 381.67 KB
- TN02788, Bonding of Pad Element Install Instructions (was 186) 121.86 KB
- TN02793, Instruction for DT series connectors (was 192) 329.80 KB
- TN02829, Circular Plug and Receptacle Install Instructions 812.54 KB
- TN02840, Single Place Plug Door Install Instruction 227.65 KB
- TN03039, LED Indicator Light Install Instructions 101.52 KB
-
Component Install/Mod Drawing
- 03030, Connector Kit Drawing/Installation Instruction (14 contact) 317.17 KB
- 03047, Connector Kit Drawing/Installation Instruction (2 contact) 351.43 KB
-
Drawing - Cable Kit/Wire Diagram
- 02764, Cable Kit Drawing for EC135 163.63 KB
-
Forms
- RTB0001, Request To Build – Fillable Form 203.46 KB