TA2862-2
$11,860.00
STC Heli-Preheat Kit – AW119 – 230V
Description
STC Heli-Preheat Kit – Leonardo-Finmeccanica (AgustaWestland), AW119 (Koala) with PT6B-37A
FAA-STC: # SR03201CH
TCCA acceptance of FAA-STC on file.
Preheating is accomplished using electrical resistance heat in the form of thin pads sized and shaped to fit various parts. The pads are surface mounted with a bonding adhesive. Heated components reach an average state of thermal equilibrium in six hours. This includes engine reduction gearboxes, attached accessories, main and tail rotor gearboxes, oil and hydraulic tanks, and battery. Power is routed to the heating elements through a dedicated shore power plug, 10A circuit protection, and wiring assembly.
This preheat kit when installed will supply 803 watts with a 3.5 amp draw at 230 volts.
* DC730 bonding sealant sourced separately (12 ounces approximately).
* AVF0001 form requested for verification of purchase.
Additional Information
Heil Manufacturer: Leonardo (AW)
Helicopter Cylinders: N/A
Engine Manufacturer: Pratt & Whitney
Old Part Number: TAS300-42-DT-230 TSHAW119-2862-230
Voltage: 230
USA-Cert (8130-3 available): STC kit (YES)
Downloads
To access any of our Downloads (Documents) below, you will need to login or register for an account.
-
Drawing - Kit (System)
- 02862-230, System Kit Drawing for AW119 257.85 KB
-
System Install Instructions
- TNH2862, AW119 Kit Install Instructions 4.35 MB
- TNG1000, Installation Guide 5.38 MB
-
ICA (Instructions for Continued Airworthiness)
- TCA1000, ICA General Preheat Kit (all kits) 269.97 KB
-
Operator's guide
- TPG1000, Operating Guide General Preheat Kit 353.41 KB
-
Drawing - Cable Kit/Wire Diagram
- 02861, Cable Kit Drawing for AW119 271.66 KB
-
Component Install/Mod Drawing
- 02929, Firewall Kit Drawing for AW119 437.75 KB
- 02933, Tailboom Kit Drawing/Install Instruction for AW119 403.06 KB
- 02935, Shore Power Kit Drawing/Install Instruction for AW119 1,019.14 KB
-
Component Install Instructions
- TN02070, Flush Mount Plug Install Instructions 214.03 KB
- TN02782, Click Bond Mount Install Instructions 381.67 KB
- TN02793, Instruction for DT series connectors (was 192) 329.80 KB
- TN02829, Circular Plug and Receptacle Install Instructions 812.54 KB
- TN02991, AW119 Door Switch Install Instruction 266.86 KB
- TN03012, Instruction Junctions 358.47 KB
- TN03039, LED Indicator Light Install Instructions 101.52 KB
- TN03046, Instruction - Thermal Control 294.71 KB
- TNDC730, Bonding with DC730 Sealant Only 126.09 KB
-
Eligibility (STC)
- SR03201CH, AW119 USA (FAA) STC 1.02 MB
- 5010-O-13-0690, AW119 Canada (TCCA) STC Acceptance 797.04 KB